Paint zoom

Specification: 48MP – 9280 X 5220 Video Frame rate: 4K(4:3)@24fps / 2K@30fps / 1080P@60fps CMOS: SONY 1/2.33 inch CMOS pixel: 1.33um x 1.33um Color setting: Auto White balance: Auto / one button calibration / Manual EV: Auto / Manual Camera mode HDMI output: 1080P @60 FPS Grid line: 8 horizontal lines, 8 vertical lines TF card: 4GB (Up to 128GB max） Cross line: Overlap or Cancel Lens jack: Standard C Power: 5V-12V/1A Size: 68x68x35mm Weight: 180g Working temperature: 0-70℃ Remote Control Instruction: 1．+ KEY: Zoom in / - KEY: Zoom out 2．UP: EV+; DOWN: EV- 3．OK: Confirm button or Start recording 4．Menu 5．Mode: Camera / Video / Playback mode change button 6．The bottom button is to take photos 7．Left & Right: Not in use. Function key operation introduction: POWER: This camera is plugged in and powered on. Press and hold for 3 seconds to shut down normally, and then short press for 1 second to restart. After the red indicator light is on, you hear a beep sound and the system is turned on successfully. MODE key: Short press for 1 second to switch to video mode after power on, then short press for 1 second to switch to photo and video clip preview mode, and short press again to return to photo mode; MENU button: Short press for 1 second after power on, enter the menu page, you can select various functions through UP/DOWN, and then press OK to enter the selected menu a ) Chinese and English language settings: press the UP/DOWN key to select, and then press the OK key to confirm; b ) Grid line setting: press the UP/DOWN key to select, then press the OK key to enter, and then press the UP/DOWN key to select the cross line ruler on or off, 8 lines on and off, each line Direction position color thickness, then press OK key to change the direction/position/color/thickness of the line, press MENU again to return to the previous level of the menu; c ) Exposure setting: Press UP to increase/DOWN to select automatic exposure or manual exposure mode, and press OK to confirm; d ) Exposure value setting: In automatic exposure mode, enter and select +-0.3/0.71.0/1.3/1.7/2.0 exposure value as needed; e ) White balance: After entering, you can choose automatic/manual/one-key white balance. If the light source is adjusted, the color may be deviated. You can put a piece of white paper to select the one-key white balance to correct the color; in special applications, it can also be passed Manual mode to adjust the value of R red and B green; f ) Color: color or black and white can be selected according to needs; g ) Light source frequency: 50Hz and 60Hz can be selected according to the situation of each country; h ) Sharpness: choose strong/standard/soft three i) Contrast setting: choose high/medium/low according to needs; i ) Video size: 2K24fps/1080P 60fps/720P 60fps three formats can be selected according to needs; j ) Mirror function: You ca